The best way to refill an electric cigarette cartomizer is by using a syringe & that’s what we’ll provide you how to do this now. There are further ways to refill the electric cigarette cartomizer, but we believe this is the fastest & quickest way to do so.
You’re going to need a few things before you start. E-liquid, an empty electric cigarette cartomizer, e cigarette battery to do the testing once were done and a syringe. The smokeless cigarette syringe were using today has a 3 milliliter capacity, a 18 gauge needle is about one and a half long. So let’s get the E juice, take the cap off of the syringe. Make sure the plunger is all the way down prior to drawing the liquid in. So grab the bottle in 1 hand, the needle in the other. Inject the syringe needle right into the nipple of the bottle. The eighteen gauge needle fits easily & goes in like butter. pull back the pludger on the syringe. The eighteen gauge can draw very quickly. This is why you may want to do it slowly. A 1/2 a ML for each vapor cigarette cartomizer is sufficient. However, lets pull on the plunger. Now, pull it up straight & you’ll now have liquid in the syringe.
Now, were going to inject it into the cartomizer. We have 2 cartomizers here one with the cap on and one with the cap off. The electric cigarette cartomizer with the cap off, has an intake hole on to the other end of the electronic cigarette cartomizer. If want to be sure that you stick the needle straight in and inject the fluid into the electronic cigarette cartomizer. If you do this, you’ll risk your vapor cigarette seaping on other side. This could altur damaging it. So what you want to do is grab the electronic cigarette cartomizer and instead of going straight in. What we what to do is tilt it up, guide your needle of your syringe along the wall and push it in.
When you push your syringe through your vapor cigarette you’ll feel some roughness which is projected. The resistance is the poly fiber that you are puncturing which is what you want to do in order to inject the fluid in there that is absorbed by poly fiber material. after you tilt it up, hit the wall. Fill up your poly fiber, get the needle about half way into the e cigarette cartomizer and push very slow.
Insert about half of the E liquid thats in the syringe into the smokeless cigarette cartomizer, pull it out & flip it around and do a 180. When we do this we can actually hear the syringe’s needle poke through the vapor cigarette cartomizers poly fiber. Now go ahead & fill the other side up & that’s it for the refill part! Make certain you put your safety cap on the syringe.
Another technique we like to do is to make sure the E liquid inside the smokeless cigarette cartomizer is dispersed accurately. Is to put the e cig cartomizer in your hands and rub back & forth slowly for around 1-2 minutes. In this particular case theirs no mess, no leak & is nice and clean.
So now, let’s vape on the 808 electronic cigarette battery. This instance it’s a lot improved and a lot more smoke and I can tell wiggling the vapor cigarette cartomizer around back & forth certainly helped with the vapor production. When were out we usually fill up about three or four smokeless cigarette cartomizers and put on the boots afterwards. This all depends on how many times you vape in a certain day and always is sure to keep your syringe, E-liquid and other electronic cig materials away from pets and children. If you ever dispose your syringe always make sure you have your safety cap on your syringe.
Vapor Corp has in stock many differnet kinds of electronic cigs, disposable electronic cigarettes, or electronic cigarettes. Give us a call now at 1-888-766-5351…